Search

[...]Manhole cover, installed flush with the surface for pedestrian and/or vehicle traffic, optionally in class A15 or B125 or D400 or E600. Weatherproof, odour-tight against pressureless water, attack-proof, rectangular in shape, made of 1.4307 (AISI 304 L) stainless steel. The access cover consists of a stainless steel tear pattern plate, with additional bracing on the bottom according to the weight (load class), slip resistance in accordance with DIN EN 124-1:2015-09, with a low-wear seal on the cover bottom side, screw lock, including lock system with anti-drilling protection, as standard with [...]

[...]Manhole cover, watertight up to 1 m head of water, round in shape, completely made of 1.4307 (AISI 304 L) stainless steel. In accordance with DIN 1239:2018-4, suitable for use in Ex zone 1. Manhole cover , watertight up to 1 m head of water, round in shape, completely made of 1.4307 (AISI 304 L) stainless steel. In accordance with DIN 1239:2018-4, suitable for use in Ex zone 1. The cover is made of stainless steel plate, with a centrally raised profile, robust external hinges, stainless steel gas assisted spring damper, integrated arrestor which can only be undone by hand, handle, circumferential[...]

[...]Manhole cover, watertight up to 1 m head of water, rectangular in shape, completely made of 1.4307 (AISI 304 L) stainless steel. In accordance with DIN 1239:2018-4, suitable for use in Ex zone 1. The cover is made of stainless steel plate, with a centrally raised profile, robust external hinges, stainless steel gas assisted spring damper, integrated arrestor which can only be undone by hand, handle, circumferential rubber seal (frost-proof and weather-resistant) fixed in a slot, central lock and protective hood of brass, which can only be opened with a special key. A connection for potential [...]

[...]Sliding hatch cover, completely made of 1.4307 (AISI 304 L) stainless steel, with smooth finish. The sliding cover provides access to downward leading stairs. The cover is made of a stable stainless steel plate and equipped with plastic rollers and maintenance-free journal bearings. The cover is installed in an external guide rail and cannot be removed. Locking when closed is possible by a cylindrical lock. The rails consist of 60/40/2 mm rectangular section fixed with dowels along the rail edge. Manhole cover and rails shielded arc-welded, acid-treated in a pickling bath and passivated. Operating[...]

[...]Manhole cover , lift-off design, for flush fitting, weather-proof, rectangular type, load-bearing up to 500 kg/m², made of 1.4307 (AISI 304 L) stainless steel. The cover consists of a stainless steel tear pattern plate, with additional bracing on the bottom according to static requirements, certified slip resistance – grip coefficient USRV 54, with a low-wear seal on the cover bottom side, lockable with hexagon screws. Frame made from U-profile, installation dimensions 60 x 60mm, provided for installation in an existing rabbet. Manhole cover and frame shielded arc-welded, acid-treated in a pickling[...]

[...]Manhole cover, secure to prevent forced access, weatherproof, round in shape, made of 1.4307 (AISI 304 L) stainless steel. Design based on DIN 1239:2018-4, security tested to resistance class RC4 (DIN EN 1627). According to requirements of DVGW W 1050 - Object protection for water supply structures. Suitable for use in Ex zone 1. The cover consisting of a 4 mm thick stainless steel plate with a centrally raised profile, with stable concealed hinges, stainless steel gas assisted spring dampers, integrated arrestor which can only be undone by hand, with handle, with a replaceable circumferential[...]

[...]Manhole cover , weatherproof, rectangular in shape, completely made of 1.4307 (AISI 304 L) stainless steel, in accordance with DIN 1239, suitable for use in Ex zone 1. The cover consists of a stainless steel checkered plate, with flush-mounted screw closure, as standard with hardened safety lock (the profile cylinder to be provided by the customer), with handle, stainless steel gas-assisted spring dampers with integrated arrester which can only be undone by hand; robust, concealed hinges. Replaceable, insect-proof rubber seal attached to the underside of the cover for low wear. Load-bearing up [...]

[...]Insertable entrance aid, with design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 300 mm, 400 mm, 500 mm width. Overall length: 1200 mm. Entrance aid in accordance with DIN 19572. Access ladders must have a handhold at their exit. This requirement is deemed to be fulfilled if one or both handles of a ladder project at least 1.1m beyond the exit height. The insertable entrance aid has hooks welded on so that it can be hung onto the top rung and remain inside the manhole. Completely shielded arc welded, acid-treated in a [...]

[...]Fold-back, extensible entrance aid, with design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 300 mm, 400 mm, 500 mm width. The fold-back, collapsible entrance aid EH KV is folded vertically upwards and extended when in use. As it is extensible, it is easy to operate and very convenient to use for the operating personnel. After use, the EH KV entrance aid is retracted and folded over the manhole opening and can thus remain in the manhole. Access ladders must have a handhold at their exit. This requirement is deemed to be [...]

[...]Catch basin, rectangular in shape, made of 1.4307 (AISI 304 L) stainless steel. Universally applicable, for retrofitting under manhole covers as protection against ingress of harmful chemicals, liquid or similar substances into the manhole. Custom-made to suit the specific local conditions. The cover is made of stainless steel plate, with a centrally raised profile, removable, with two handles. The frame consists of an angle section designed as an outlet channel, provided for bolted fixing inside the manhole under the manhole cover, with integrated ¾“ hose nozzle, for on-site connection to an [...]