Search

[...]Access door for buildings in potable water supply where chlorine gas is stored or used Chlorine room door, ready for installation, single door, double skinned, completely made from 1.4404 (AISI 316 L) stainless steel, with double rubber seal, the door and frame closing flush, the door opening to the outside (in escape direction), in accordance with UVV and DVGW standards. Door, skin: 1 mm , 55 mm thick, with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, door inside lacquered in RAL 9006 (stainless steel look), with rubber seal. Fastened to the frame[...]

[...]Prefabricated manhole, completely made of 1.4307 (AISI 304 L) stainless steel Watertight, with entrance and installation opening in accordance with DVGW Standard W 122. Completely shielded arc welded, acid-treated in a pickling bath and passivated, including all built-in components. Completely stainless steel - offers long life and hygiene Absolutely water-tight - no danger of leakage Bottom made of tear pattern plate (slip resistance R 11 in accordance with DIN 51130) with inclination to the pump sump For bolted fixing on a customer-provided concrete foundation (required for watertight [...]

[...]Adjustable louvre TT10.B for internal face of the wall, ready for installation, 1.4307 (AISI 304 L) stainless steel. Frame , made from angle section with boreholes for bolted fixing. Slats , adjustable, overlapping when closed, with chain pull lockable in any position. Both frame and slats are shielded arc-welded and acid bath cleaned before washing, drying and surface passivation. Options: 1.4404 (AISI 316 L) stainless steel Fixing material[...]

[...]Products and solutions for the safe operation of sewer systems and the protection of our environment Only with a functioning sewer network can secure wastewater disposal be ensured that meets both water protection and flood protection requirements. Combined sewers carry the wastewater together with the rainwater that accumulates on paved surfaces (roofs, roads, etc.). In a separate sewer system, wastewater and stormwater are collected separately. The disadvantage of separate sewer systems is higher investment costs, the advantage is that less wastewater has to be treated in the sewage treatment[...]

[...]Safety for people and water with HUBER products and solutions Water is our most important food and every human being worldwide should always have access to water in sufficient quantity and quality. The task of water suppliers is the extraction, treatment, storage and distribution of water to the consumers. HUBER has been supporting the water utilities in their task for decades with an extensive product range and numerous solutions. HUBER products and solutions for the safety of people and water Drinking Water Treatment : Selected process technology for the production of drinking water from [...]

[...]Process technology for the treatment and recycling of biowaste Saving disposal costs Treating process water and purifying wastewater Minimising residues Separating disturbing solids (plastic) Reducing operating costs The aim of biological waste treatment is to recover energy from the organic fraction of household waste as well as from organic waste, such as biowaste and food waste. For dry aerobic treatment (composting) and wet anaerobic treatment (fermentation with biogas production), good mechanical pre-treatment of the supplied biowaste is essential for the reliability and performance of the[...]

[...]Complete solutions for wastewater, process water, residues and sludge Reduce disposal costs Comply with limit values Separate solids and contaminants Dewater sludge Separate biomass Reuse water We offer proven and customised solutions with short payback times for all wastewater problems in the beverage industry – for breweries and malt houses as well as for manufacturers and bottlers of fruit juices, soft drinks and mineral water. High solids loads and COD values are typical for the beverage industry. We have safe and proven solutions to reduce the loads on site. Wastewater treated in this way [...]

[...]Wastewater treatment and sludge treatment in maritime applications: cruise ships and port facilities Wastewater screening Grease removal and COD reduction Compaction of sludge and residues Adapted solutions for tight spaces Minimum operating and maintenance requirements We offer proven and customised solutions for the specific situation on ships or in maritime applications. Adapted solutions for wastewater pre-treatment have been designed in particular for the confined space conditions, which fit in optimally. Whether you need individual machines or process solutions, we are your competent [...]

[...]Enabling water cycles, removing disturbing solids, compacting residual materials Reduce disposal costs Increase economic efficiency Separate disturbing solids and coarse material Remove grit and mineral material Separate organic matter Dewater residues Save process water The recycling of plastics from households, industry and agriculture is becoming increasingly important for ecological and economic reasons. A large number of new plants for the wet-mechanical processing of plastics are being built all over the world. The resulting wastewater must be treated and reused in the best possible way. [...]

[...]Wastewater treatment for the fish processing industry Reduce disposal costs Separate solids and impurities Dewater excess sludge Separate biomass Comply with limit values Reduce operating costs Wastewater from the fish processing industry is characterized by high COD, grease and solids contents. HUBER supplies tailor-made solutions based on standardised machine technology, adapted to the individual composition of each type of wastewater and always oriented towards the required effluent quality and the project-specific requirements. HUBER products and solutions for your requirements From our range[...]