Search

[...]Grand Rapids, MI USA An alternative for ageing scraper bridges. They work constantly, know no weekends and are exposed to wind and rain. They are familiar with wear and corrosion and are grateful for a few drops of lubricating oil. We are talking about the scraper bridges of grit channels. When the ravages of time take their toll At some point, after what feels like two sewage works operator’s lifetimes, the time comes when this ‘vehicle’ is no longer fit for purpose. The concrete of the grit channel could certainly withstand the same amount of time again, but the machinery has had its day.[...]

[...]Entrance handle, completely made of 1.4307 (AISI 304 L) stainless steel Consisting of bent pipe 33.7 x 2.0 mm with fixing plates for wall fixing. Entrance handle, completely shielded arc welded, acid-treated in a pickling bath and passivated. Optionally available in: 1.4404 (AISI 316 L) stainless steel Stainless steel fixing material: stud anchors[...]

[...]Aeration/deaeration plant, max. throughput 250 m³/h Natural aeration/deaeration plant with air connections on both sides to improve the hygiene in drinking water reservoirs. Completely made of 1.4307 (AISI 304 L) stainless steel except the filter material, shielded arc welded, acid-treated in a pickling bath and passivated. Ready-to-operate installation, without brickwork, plastering, chiselling and electrical work, without drain pipe. Louvre , attack-proof, pre-finished, rigid design, with a stable frame, slats and 1 x 1 mm insect screen. The insect screen serves as first filter stage and [...]

[...]Plants for sludge treatment (e.g. HUBER Screw Press Q-PRESS ® , HUBER Disc Thickener S-Disc) or for pre- and secondary treatment of industrial and municipal wastewater (e.g. HUBER Flotation Plant HDF) are usually purchased in Germany. This involves prior planning, authorisation, construction of infrastructure and buildings, as well as permanent responsibility for the acquired plant technology. In addition, the process from idea to implementation often takes several years. Industrial plant operators, in particular, increasingly wish and demand to rent rather than permanently purchase machinery [...]

[...]Aeration/deaeration plant, max. throughput 3000 m³/h Natural aeration/deaeration plant with air connections on both sides to improve the hygiene in drinking water reservoirs. Completely made of 1.4307 (AISI 304 L) stainless steel except the filter material, shielded arc welded, acid-treated in a pickling bath and passivated. Security louvre , attack-proof, pre-finished, rigid design, with a stable frame, slats and 1 x 1 mm insect screen. Air line in partial lengths according to the specific local conditions, with a connecting plate designed to suit the louvre for air-tight bolted fixing to the[...]

[...]Fall arrestor type S5c with self-unfolding safety belt type HSE-BFD and spring safety hooks Certified and approved by “TÜV SÜD PRODUCT SERVICE GmbH“. CE 0123 in accordance with DIN EN 353-1, suitable for HUBER safety guard rails. Optionally available: Safety belt in accordance with EN 361, form A (breast-shoulder-crotch belt), suitable for safety guard rail.[...]

[...]Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 30 m Pressure-tight door , pressure-tight up to a water gauge of 30 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 300 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Door, curved convex design with frame reinforcements to ensure that the acting pressure forces can pass into the door frame via the circumferential frame. With circumferential special silicone seal, suitable for [...]

[...]Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 10 m Pressure-tight door , pressure-tight up to a water gauge of 10 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 300 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Registered design no. 298 01 144.1 Door, plate thickness: 5 mm thick , reinforced with U-shaped bent plate. Smooth door leaf on the pressure side. With circumferential square silicone seal, suitable for potable water,[...]

[...]Maintenance opening, especially in the field of potable water supply Access cover, pressure-tight up to a water gauge of 5 m, ready for installation, round, completely made from 1.4307 (AISI 304 L) stainless steel, with intermediate sealing suitable for the specific application, can be lined on both sides. Blank cover with lock and two handles for easy operation, connected with the frame by means of screwed joints. Frame, designed as F-piece with centrally welded wall flange, provided for embedding in concrete. Frame with lifting eyes. Blank cover and frame shielded arc-welded and acid bath [...]

[...]Access door for containers, especially in the field of potable water supply Pressure-tight door , pressure-tight up to a water gauge of 10 m, opening to the pressure side, ready for installation, to be lined on both sides, round, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Door, bent for increased pressure capacity . With circumferential square silicone seal, suitable for potable water, ozone resistant, certified to KTW and DVGW W 270 standards. Locking with the help of screw locks operable only from the dry side. With stable maintenance-free hinge plates [...]