Search

[...]Security door, burglar and attack proof, certified to security of DIN EN 1627, resistance class RC3, ready for installation, single-leaf, double skinned, watertight up to 1.2 m WG, completely made from 1.4307 (AISI 304 L) stainless steel, with double rubber seal, the door opening to the outside (in escape direction). Door with injected CFCs-free polyurethane hard foam insulation. Longitudinally ground surface finish, with rubber seal. The closed door engaging flush with the frame by means of solid anchor bolts engaging in the frame for four-point locking. Fastened to the frame with stable, maintenance-free special hinge plates that compensate for increasing water pressure. Galvanized safety lock with stainless steel forend, with austenitic manganese steel plate as anti-drilling protection, provided for a customer-provided mechanical profile half cylinder in accordance with DIN 18252:2006-12,21-,31-,71-BZ), with anti-panic lock, i.e. the door can any time be opened from inside by operating the handle, even when locked. Protective stainless steel fitting, without cylinder cover, with a rigidly mounted turning handle and a red plastic handle inside. Handle set above the maximum water column. Frame, four-sided, with injected CFCs-free polyurethane hard foam insulation, made of stainless steel, for on-site installation, mounting and sealing materials included. Frame and door leaf shielded arc-welded and acid bath cleaned before washing, drying and surface passivation. Maximum permitted leakage rate: 0.3 litres/hour Options 1.4404 (AISI 316 L) stainless steel Upper door closer, lockable in position Upper door arrestor, releasable by hand Lockable from inside with a second handle Magnetic contact: “door open” or “door closed” status display Lock-bolt contact: “locked” or “unlocked” status display Potential equalisation on hinge side on top of frame Surface finish (lacquer with or without anti-graffiti properties) Lock for two side-by-side profile cylinders (that can be opened independently) Stainless steel rain protection rosette for the stainless steel profile cylinder Rain rail on top of frame Steel sheet finish for exterior door surface for installations exposed to sunlight Frame / mounting Options: Bolted with dowelling clips Bolted through the frame Door opening Options: Hinges on left Hinges on right Note: If the door is exposed to sunlight, its operability may be affected. In such a case, it is recommended to equip the door outside with a steel sheet finish.[...]

[...]Casement window, tilt and turn window, ready for installation Made from two-sheet special 1.4301 (AISI 304) stainless steel profile with intermediate special plastic core to prevent thermal conduction, thermally insulated according to EN 10077, Uf = 2.70 W/(m²*K), fittings specially E-Look galvanised, stainless steel handle set. Blind frame, circumferential , made from special profile, designed for dowelling into window soffit, including fixing material. Sash frame , made from Z-profile, integrated fittings. Multiple locking via handle set. Two rebate gaskets. Glazing bead invisibly fastened. Machine ground surface finish. Dry glazing with insulation glass, without KTW approval. Door opening options: Hinges on left Hinges on right Options 1.4404 (AISI 316 L) stainless steel Secure to prevent forced access according to DIN EN 1627, RC3, galvanized fittings, only possible with wet glazing Special glazing (e.g. security glass) Multi-wing window Outside window sill made from stainless steel Water chamber window (with drain holes towards the dry side, with wet glazing, KTW approved Lockable handle set provided for profile cylinder Other designs available on request[...]

[...]Casement window, swivel window, ready for installation Made from two-sheet special 1.4301 (AISI 304) stainless steel profile with intermediate special plastic core to prevent thermal conduction, thermally insulated according to EN 10077, Uf = 2.70 W/(m²*K), fittings specially E-Look galvanized, stainless steel handle set. Blind frame , circumferential, made from special profile, designed for dowelling into window soffit, including fixing material. Sash frame , made from Z-profile, integrated fittings. Multiple locking via handle set. Two rebate gaskets. Glazing bead invisibly fastened. Machine ground surface finish. Dry glazing with insulation glass, without KTW approval. Door opening options: Hinges on left Hinges on right Options 1.4404 (AISI 316 L) stainless steel Secure to prevent forced access according to DIN EN 1627, RC3, galvanized fittings, only possible with wet glazing Special glazing (e.g. security glass) Multi-wing window Outside window sill made from stainless steel Water chamber window (with drain holes towards the dry side, with wet glazing, KTW approved) Lockable handle set provided for profile cylinder Other designs available on request[...]

[...]Frame window, ready for installation, tilt window Made from two-sheet special 1.4301 (AISI 304) stainless steel profile with intermediate special plastic core to prevent thermal conduction, thermally insulated according to EN 10077, Uf = 2.70 W/(m²*K), fittings galvanised, tilt fittings with catch or handle. Blind frame, circumferential, made from special profile , designed for dowelling into window soffit, including fixing material. Sash frame, made from Z-profile, integrated fittings. Two rebat gaskets. Glazing bead invisibly fastened. Machine ground surface finish. Dry glazing with insulation glass, without KTW approval Options 1.4404 (AISI 316 L) stainless steel Secure to prevent forced access according to DIN EN 1627 Special glazing (e.g. security glass) Multi-wing window Outside window sill made from stainless steel Water chamber window (with drain holes towards the dry side, with wet glazing, KTW approved) Other designs available on request[...]

[...]Frame window, rigid, ready for installation Made from two-sheet special 1.4301 (AISI 304) stainless steel profile with intermediate special plastic core to prevent thermal conduction, thermally insulated according to EN 10077, Uf = 2.70 W/(m²*K). Glazing bead invisibly fastened . Frame, designed for dowelling into window soffit, including fixing material. Machine ground surface finish. Dry glazing with insulation glass, without KTW approval Options 1.4404 (AISI 316 L) stainless steel Special glazing (e.g. security glass) Outside window sill made from stainless steel Water chamber window, with drain holes towards the dry side, wet glazing KTW approved Secure to prevent forced access according to DIN EN 1627, RC3 (only possible with wet glazing) Multi-wing window Other designs available on request[...]

[...]Venting chimney / ventilation stack DN 150 154 mm outside dia.), with insect-proof stainless steel screen, mesh 1x1 mm, free sectional area 37%, with attached hood. Completely made of 1.4307 (AISI 304 L) stainless steel and shielded arc welded, acid-treated in a pickling bath and passivated. Vapour hood for optimal shaft ventilation A insect filter offers protection against small animals Stainless steel, acid-treated in a pickling bath - offers long life and hygiene Short-term availability from stock in various lengths Options Options for vertical installation: Adjustable wall flange Welded-on wall flange Welded-on dowel flange Rubber seal and fixing material for the dowel flange Pipe saddle DN 150, wall distance to pipe axis: 227 mm ± 30 mm Plastic connection possible (only for manhole interior) Options for lateral installation: Guard grille for dowelling to the inner tank wall, mesh 10 x 10 mm, free cross section, 55% Rubber seal and fixing material for the dowel flange Pipe saddle DN 150, wall distance to pipe axis: 227 mm ± 30 mm Options for both installation variants: Replaceable pollen filter Tubular biofilter within the ventilating chimney for odour elimination 1.4404 (AISI 316 L) stainless steel Other pipe diameters[...]

[...]Universally applicable for controlled ventilation of buildings, especially in the field of potable water supply, and for plants with increased security requirements. Rigid safety louvre TT2.JW (for external face of the wall), attack proof, ready for installation, of rigid all welded construction, completely made from 1.4307 (AISI 304 L) stainless steel. Frame, made from Z profile , 3 mm thick, designed for internal bolted fixing, with access to the anchors only from the interior wall surface. Slats, 3 mm thick , rigidly welded, with the slats staggered so that penetration is impossible even with moveable hoses. With 1 x 1 mm fly screen on the inside. Both frame and slats are shielded arc-welded and acid bath cleaned before washing, drying and surface passivation. Options 1.4404 (AISI 316 L) stainless steel Lacquered on the outside Ground surface finish Additional internal frame with removable fine filter for dust and pollen, held by wing nuts Fixing material[...]

[...]Sight glass in the bottom of water tanks, pressure-tight up to a water gauge of 10 m Inspection cover , pressure-tight up to a water gauge of 10 m, round, completely made from 1.4404 (AISI 316 L) stainless steel, can be lined on both sides. Sight glass with 15 mm thick safety glass , convex towards the pressure side. Sealing with two rubber seals. Clear sight diameter: 400 mm. Access duct cover with centrally welded wall flange, provided for embedding in concrete. Wall flange dimensions: 616 mm. Access duct cover shielded arc-welded, acid-treated in a pickling bath and passivated. Options 1.4307 (AISI 304 L) stainless steel Sanding of wall pipe parts in contact with concrete[...]

[...]Access door for the field of potable water supply, especially in areas where flooding is likely Exterior door, f lood proof up to a water gauge of 2 m, opening to the outside (pressure side), ready for installation, single-leaf, double skinned, completely made from 1.4307 stainless steel (AISI 304 L). The door and the frame closing flush. Door leaf, Sheet thickness 3 mm on both the pressurised and non-pressurised side. Door leaf thickness: 57 mm, with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, with special seal on all four sides. Attached to the frame with stable, maintenance-free hinge plates. Lock prepared for an onsite profile half cylinder lockable from the outside. It is locked by means of a locking lever that can be operated from both sides. Frame made of special profile, all-round on four sides, with injected CFCs-free polyurethane hard foam insulation, with associated fixing material. The circumferential gap between the frame and the wall must be sealed with the sealing material supplied. Door leaf and frame welded under inert gas, pickled in an immersion bath and passivated. Max. permitted leakage rate: 0.3 litres/hour. Options General Options: 1.4404 (AISI 316 L) stainless steel Anchor hooks on the door leaf, which engage positively in the frame when closed. Upper door closer lockable in position Surface finish (painted outside with or without anti-graffiti finish) Magnetic contact: „Door open“ or „Door closed“ status display Lock-bolt contact: „Bolt open“ or „Bolt closed“ status display Potential equalisation on frame Steel sheet finish for exterior door surface for installations exposed to sunlight Ordering options: Frame mounting: Bolted with dowelling clips Bolted through the frame Door opening options: Hinges on left Hinges on right[...]

[...]Access door for buildings in the field of potable supply without a burglar alarm system Security class RC4 is recommended by the criminal investigation department if the building is not secured by means of a burglar alarm system. Security door, burglar and attack proof , certified to security of DIN EN 1627, resistance class RC4, ready for installation, double-leaf, double skinned, completely made from 1.4307 (AISI 304 L) stainless steel, with double rubber seal, the door leaves and frame closing flush, the fixable and swing leaf opening to the outside (in escape direction). Sound insulation: 34/29 dB. Door leaves with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, with rubber seal. Fastened to the frame with stable maintenance-free hinge plates. The closed door leaves engage flush with the frame by means of solid anchor bolts engaging in the frame for four-point locking. Additional protection of the internal lock box through an attack-proof protecting plate with anti-panic function. Galvanized safety lock with stainless steel forend, with austenitic manganese steel plate as anti-drilling protection, provided for a customer-provided mechanical profile half cylinder in accordance with DIN 18252:2006-12,21-,42-,82-BZ, with anti-panic lock, i.e. the door can any time be opened from inside by operating the handle, even when locked. Protective stainless steel fitting, with cylinder cover, with a rigidly mounted turning handle on the stainless steel outside cover and a red plastic handle inside. The fixable leaf is operated by means of a sliding locking bolt. The contact surface between the opening leaf and fixable leaf is rubber sealed. Frame, three-sided as block frame , with inserted rubber seal, with step flashing, including fixing material. Frame and door shielded arc-welded and acid bath cleaned before washing, drying and surface passivation. Options 1.4404 (AISI 316 L) stainless steel One/two security ventilation louvre(s) size 400 x 200 mm Provided for a customer-supplied digital profile cylinder Upper door closer, lockable in position One-part or two-part door arrestor Lowerable floor seal Lockable from inside with a second handle Surface finish (lacquer with or without anti-graffiti properties, wooden panelling) Electronic monitoring options (alarm system in door surface, magnetic contact, lock-bolt contact) Door heating (heating cable in frame and/or door surface), without temperature sensor, without controls Lock for two side-by-side profile cylinders (that can be opened independently) Block frame insulation Potential equalisation on frame Steel sheet finish for exterior door surface for installations exposed to sunlight Mounting: Bolted with dowelling clips Bolted through the frame Door opening options: Hinges on left Hinges on right Note: If the door is exposed to sunlight, its operability may be affected. In such a case, it is recommended to equip the door outside with a wood panelling or steel sheet.[...]