Search

[...]Access door for buildings in the field of potable water supply equipped with a burglar alarm system Security door, burglar and attack proof, certified to security of DIN EN 1627, resistance class RC3, ready for installation, double skinned, completely made from 1.4307 (AISI 304 L) stainless steel, with double rubber seal, the door leaves and frame closing flush, the fixable and swing leaf opening to the outside (in escape direction). Door leaves with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, with rubber seal. Fastened to the frame with stable [...]

[...]Access door for buildings in the field of potable water supply without a burglar alarm system Security class RC4 is recommended by the criminal investigation department if the building is not secured by means of a burglar alarm system. Security door, burglar and attack proof , certified to security of DIN EN 1627, resistance class RC4, ready for installation, single-leaf, double skinned, completely made from 1.4307 stainless steel (AISI 304 L), with double rubber seal, the door and frame closing flush, the door opening to the outside (in escape direction). Sound insulation: 34/29 dB. Door leaf [...]

[...]Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 10 m Pressure-tight door , pressure-tight up to a water gauge of 10 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 280 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Door, 5 mm thick , reinforced with U-shaped bent plate. Smooth door leaf on the pressure side. With circumferential square silicone seal, suitable for potable water, ozone resistant, certified to KTW and DVGW W 270 [...]

[...]Collapsible hand post with double handle, with design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 300 mm, 400 mm, 500 mm width, for ladder lengths from 2010 mm. Overall length: 1800 mm. Entrance aid in accordance with DIN 19572. Access ladders must have a handhold at their exit. This requirement is deemed to be fulfilled if one or both handles of a ladder project at least 1.1 m beyond the exit height. Completely shielded arc welded, acid-treated in a pickling bath and passivated. Optionally available in: 1.4404 (AISI 316[...]

[...]Manhole cover, installed flush with the surface for pedestrian and/or vehicle traffic, optionally in class A15 or B125, D400 or E600. Weatherproof, odour-tight against pressureless water, attack-proof, round in shape, made of 1.4307 (AISI 304 L) stainless steel. The cover consists of a stainless steel tear pattern plate, with additional bracing on the bottom according to the weight (load class), slip resistance in accordance with DIN EN 124-1:2015-09, with a low-wear seal on the cover bottom side, screw lock, including lock system with anti-drilling protection, as standard with hardened safety[...]

[...]Manhole cover, installed flush with the surface for pedestrian and/or vehicle traffic, optionally in class A15 or B125 or D400 or E600. Weatherproof, odour-tight against pressureless water, attack-proof, rectangular in shape, made of 1.4307 (AISI 304 L) stainless steel. The access cover consists of a stainless steel tear pattern plate, with additional bracing on the bottom according to the weight (load class), slip resistance in accordance with DIN EN 124-1:2015-09, with a low-wear seal on the cover bottom side, screw lock, including lock system with anti-drilling protection, as standard with [...]

[...]Manhole cover, watertight up to 1 m head of water, round in shape, completely made of 1.4307 (AISI 304 L) stainless steel. In accordance with DIN 1239:2018-4, suitable for use in Ex zone 1. Manhole cover , watertight up to 1 m head of water, round in shape, completely made of 1.4307 (AISI 304 L) stainless steel. In accordance with DIN 1239:2018-4, suitable for use in Ex zone 1. The cover is made of stainless steel plate, with a centrally raised profile, robust external hinges, stainless steel gas assisted spring damper, integrated arrestor which can only be undone by hand, handle, circumferential[...]

[...]Manhole cover, watertight up to 1 m head of water, rectangular in shape, completely made of 1.4307 (AISI 304 L) stainless steel. In accordance with DIN 1239:2018-4, suitable for use in Ex zone 1. The cover is made of stainless steel plate, with a centrally raised profile, robust external hinges, stainless steel gas assisted spring damper, integrated arrestor which can only be undone by hand, handle, circumferential rubber seal (frost-proof and weather-resistant) fixed in a slot, central lock and protective hood of brass, which can only be opened with a special key. A connection for potential [...]

[...]Sliding hatch cover, completely made of 1.4307 (AISI 304 L) stainless steel, with smooth finish. The sliding cover provides access to downward leading stairs. The cover is made of a stable stainless steel plate and equipped with plastic rollers and maintenance-free journal bearings. The cover is installed in an external guide rail and cannot be removed. Locking when closed is possible by a cylindrical lock. The rails consist of 60/40/2 mm rectangular section fixed with dowels along the rail edge. Manhole cover and rails shielded arc-welded, acid-treated in a pickling bath and passivated. Operating[...]

[...]Manhole cover , lift-off design, for flush fitting, weather-proof, rectangular type, load-bearing up to 500 kg/m², made of 1.4307 (AISI 304 L) stainless steel. The cover consists of a stainless steel tear pattern plate, with additional bracing on the bottom according to static requirements, certified slip resistance – grip coefficient USRV 54, with a low-wear seal on the cover bottom side, lockable with hexagon screws. Frame made from U-profile, installation dimensions 60 x 60mm, provided for installation in an existing rabbet. Manhole cover and frame shielded arc-welded, acid-treated in a pickling[...]