[...]Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 32.8 ft. / 10 m Pressure-tight door , pressure-tight up to a water gauge of 32.8 ft. / 10 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 12 in. / 300 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Registered design no. 298 01 144.1 Door, plate thickness: 0.2 in. / 5 mm thick , reinforced with U-shaped bent plate. Smooth door leaf on the pressure side. With circumferential square [...]
[...]Access door for buildings in the field of potable supply without a burglar alarm system Security class RC4 is recommended by the criminal investigation department if the building is not secured by means of a burglar alarm system. Security door, burglar and attack proof, certified to security of DIN EN 1627, resistance class RC4, ready for installation, double-leaf, double skinned, completely made from 1.4307 (AISI 304 L) stainless steel, with double rubber seal, the door leaves and frame closing flush, the fixable and swing leaf opening to the outside (in escape direction). Sound insulation: 34/29[...]
[...]Access door for buildings in the field of potable water supply equipped with a burglar alarm system The security door is burglar and attack-resistant, certified to DIN EN 1627, resistance class RC3. It is ready for installation, double-skinned, and fully constructed from 1.4307 (AISI 304 L) stainless steel. The door features a double rubber seal, with the door leaves and frame closing flush. Both the fixable and swing leaf open outward in the escape direction. The door leaves are insulated with injected, CFCs-free polyurethane hard foam, longitudinally ground surface finish, with rubber seal. [...]
[...]Access door for buildings in the field of potable water supply equipped with a burglar alarm system The security door is burglar and attack-resistant, certified to DIN EN 1627, resistance class RC3. It is ready for installation, double-skinned, and entirely constructed from 1.4307 stainless steel (AISI 304 L). The door features a double rubber seal, with the door and frame closing flush. It opens outward in the escape direction. Sound insulation: 34/29 dB. Security class RC3 is recommended by the criminal investigation department if the building is additionally secured by means of a burglar [...]
[...]Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 32.8 ft. / 10 m Pressure-tight door , pressure-tight up to a water gauge of 32.8 ft. / 10 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 11 in. / 280 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Door, 0.2 in. / 5 mm thick , reinforced with U-shaped bent plate. Smooth door leaf on the pressure side. With circumferential square silicone seal, suitable for potable water, ozone resistant[...]
[...]Access door for water chambers, ready for installation, single door, double skinned Completely made from 1.4404 stainless steel (AISI 316 L), with double rubber seal. The door and frame closing flush, the door opening to the outside (in escape direction). Door leaf, skin: 1 mm , 2 in. / 55 mm thick, with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, door seal certified to KTW and DVGW W270 standards. Fastened to the frame with stable maintenance-free hinge plates. Mortise dead lock completely made from stainless steel according to DIN 18251, class 3,[...]
[...]Targeted dosing of chemicals for better clarification performance with less consumption The use of chemicals such as acids, alkalis, flocculants or flocculation aids is necessary in many areas of wastewater treatment and sludge treatment in order to achieve the required process performance. Ideally, the right chemicals should be added in exactly the right dosage to avoid either underdosing or overdosing. While underdosing leads to reduced performance, overdosing leads to increased operating costs and can also have a negative impact on the process. The fluctuations in concentration and volume[...]
[...]Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 98.4 ft. / 30 m Pressure-tight door , pressure-tight up to a water gauge of 98.4 ft. / 30 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 12 in. / 300 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Door, curved convex design with frame reinforcements to ensure that the acting pressure forces can pass into the door frame via the circumferential frame. With circumferential special silicone[...]
[...]Privacy Policy Information for handling personal data We take Privacy Seriously The protection of your privacy when processing personal data is important to us. When you visit our website, our web servers store the IP address of your internet service provider, the website from which you visit us, the websites you visit, the date and duration of the visit. This information is required to ensure the necessary technical transmission between websites and secure server operation. There is no further analysis and processing of this data. Responsible: HUBER SE Industriepark Erasbach A1 92334 Berching[...]
[...]Manhole cover, secure to prevent forced access, weatherproof, round in shape, made of 1.4307 (AISI 304 L). In accordance with DIN 1239:2018-4, security tested to resistance class RC3 (DIN EN 1627). According to requirements of DVGW W 1050 - Object protection for water supply structures. Suitable for use in Ex zone 1. The cover is constructed from a 4 mm thick stainless steel plate with a centrally raised profile. It features stable concealed hinges, stainless steel gas-assisted spring dampers, and an integrated arrestor that can only be released manually. The design includes a handle and a [...]