Search

[...]Insertable entrance aid, with design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 11.8 in., 15.7 in., 19.6 in. / 300 mm, 400 mm, 500 mm width. Overall length: 47.2 ft. / 1,200 mm. Entrance aid in accordance with DIN 19572. Access ladders must be equipped with a handhold at their exit. This requirement is considered fulfilled if one or both handles of a ladder project has at least 3.6 ft. / 1.1 m beyond the exit height. The insertable entrance aid has hooks welded on so that it can be hung onto the top rung and remain inside[...]

[...]Collapsible hand post with double handle, with design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 11 in., 12 in., 13 in. / 300 mm, 400 mm, 500 mm width, for ladder lengths from 6 ft. / 2,010 mm. Overall length: 70 in. / 1,800 mm. Entrance aid in accordance with DIN 19572. Access ladders must have a handle at their exit. This requirement is considered met if one or both ladder handles extend at least 3.6 ft. / 1.1 m beyond the exit height. Completely shielded arc welded, acid-treated in a pickling bath and passivated. [...]

[...]Single-beam entrance aid, with design certification in accordance with DIN 19572 Made of 1.4404 (AISI 316 L) stainless steel. Available as either a removable and portable or as stationary collapsible unit. Consisting of a handle and guide. Guide with two holes, diameter: .47 in. / 12 mm, for bolted fixing to the wall of the manhole. Equipped with a handle made from distortion-free pipe, 33.7 x 3.6 mm, total length: 59 in. / 1500 mm. Completely shielded arc welded, acid-treated in a pickling bath and passivated. Additional options available: Stainless steel fixing material: stud anchors Special[...]

[...]HUBER Technology Service Your strong and reliable partner We are proud to offer our customers 24/7/365 support. This ensures your equipment continues to meet the high standards of quality and performance you expect from HUBER. We are proud to offer our customers 24/7/365 support. This ensures your equipment continues to meet the high standards of quality and performance you expect from HUBER. HUBER Technology Service The HUBER Service Edge What do over 3500 HUBER Installations in North America have in common? With every purchase of quality HUBER equipment you, the owner, joins a family of satisfied[...]

[...]Zaragoza, Spain[...]

[...]Kaditz, Germany Hot and greasy – sludge screening with the STRAINPRESS® On the way from a sewage treatment works to an energy park – Stadtentwässerung Dresden undertake a variety of measures on STP Kaditz to achieve this goal. One of these measures is the acceptance and treatment of foreign material for co-fermentation in the digesters. They want to use the energy-rich grease sludge to increase the gas production in the two 10,500 m³ digesters and thus achieve a significantly higher energy production in the two block heat and power plants. The grease separator contents delivered by tanker [...]

[...]Braunschweig, Germany The "baby" solar dryer is back In 2012, HUBER SE manufactured a mobile solar dryer in a container for Expoval Sludge, a research project supported by the Federal Ministry of Education and Research (BMBF). The dryer was extensively tested in cooperation with the Institute for Sanitary Engineering of the Technical University of Braunschweig in Germany, in Poland and in Colombia. The results achieved with the dryer were summed up in a DWA work sheet on solar sludge drying. The baby solar dryer was recently taken out of the research project and overhauled. In autumn this year[...]

[...]Nova Gorica, Slovenia HUBER received the first order for a Belt Dryer BT installation in Slovenia. Besides a number of other HUBER products, the BT 8 will be installed on the sewage treatment plant of the town Nova Gorica in western Slovenia, not far from the Italian border. The dryer is designed for an annual throughput of 9,300 t dewatered sewage sludge. In summer 2014, HUBER received the order to supply the complete equipment for mechanical wastewater treatment and sludge treatment. The mechanical equipment comprises two coarse screens type HUBER Multi-Rake Bar Screen RakeMax®, two fine [...]

[...]Bayreuth, Germany In a new sludge treatment plant in Bayreuth the sludge from 300,000 PE is dewatered and dried – fully automatically, with the use of exhaust heat and exhaust air treatment. The project is still in the construction phase. The new plant will process the generated sludge from 2016 on. From the dewatering system into the dryer The digester sludge with a DR content of between 2.5 and 3.5% is dewatered by two centrifuges and automatically transported into the solar dryer by screw conveyors.The dry residue is measured automatically by a probe so that polymer consumption can be optimized[...]

[...]Ingolstadt, Germany Two HUBER belt dryers BT were put into operation on STP Ingolstadt in August 2005. The installed total dryer surface is 160 m² which is the same as that of our new dryer type BT 16. The scope of supply of HUBER SE included not only the drying plants but also the sludge bunkers and thick sludge pumps. The exhaust air treatment system has already been installed. Figure 2 shows the complete plant. The special feature of sewage sludge drying on STP Ingolstadt is that the drying process takes place on a very low temperature level. Warm water with a temperature of 53 °C is available[...]