[...]Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 32.8 ft. / 10 m Pressure-tight door , pressure-tight up to a water gauge of 32.8 ft. / 10 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 12 in. / 300 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Registered design no. 298 01 144.1 Door, plate thickness: 0.2 in. / 5 mm thick , reinforced with U-shaped bent plate. Smooth door leaf on the pressure side. With circumferential square [...]
[...]Access door for buildings in the field of potable supply without a burglar alarm system Security class RC4 is recommended by the criminal investigation department if the building is not secured by means of a burglar alarm system. Security door, burglar and attack proof, certified to security of DIN EN 1627, resistance class RC4, ready for installation, double-leaf, double skinned, completely made from 1.4307 (AISI 304 L) stainless steel, with double rubber seal, the door leaves and frame closing flush, the fixable and swing leaf opening to the outside (in escape direction). Sound insulation: 34/29[...]
[...]Access door for buildings in the field of potable water supply equipped with a burglar alarm system The security door is burglar and attack-resistant, certified to DIN EN 1627, resistance class RC3. It is ready for installation, double-skinned, and fully constructed from 1.4307 (AISI 304 L) stainless steel. The door features a double rubber seal, with the door leaves and frame closing flush. Both the fixable and swing leaf open outward in the escape direction. The door leaves are insulated with injected, CFCs-free polyurethane hard foam, longitudinally ground surface finish, with rubber seal. [...]
[...]Access door for buildings in the field of potable water supply equipped with a burglar alarm system The security door is burglar and attack-resistant, certified to DIN EN 1627, resistance class RC3. It is ready for installation, double-skinned, and entirely constructed from 1.4307 stainless steel (AISI 304 L). The door features a double rubber seal, with the door and frame closing flush. It opens outward in the escape direction. Sound insulation: 34/29 dB. Security class RC3 is recommended by the criminal investigation department if the building is additionally secured by means of a burglar [...]
[...]Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 32.8 ft. / 10 m Pressure-tight door , pressure-tight up to a water gauge of 32.8 ft. / 10 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 11 in. / 280 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Door, 0.2 in. / 5 mm thick , reinforced with U-shaped bent plate. Smooth door leaf on the pressure side. With circumferential square silicone seal, suitable for potable water, ozone resistant[...]
[...]Access door for water chambers, ready for installation, single door, double skinned Completely made from 1.4404 stainless steel (AISI 316 L), with double rubber seal. The door and frame closing flush, the door opening to the outside (in escape direction). Door leaf, skin: 1 mm , 2 in. / 55 mm thick, with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, door seal certified to KTW and DVGW W270 standards. Fastened to the frame with stable maintenance-free hinge plates. Mortise dead lock completely made from stainless steel according to DIN 18251, class 3,[...]
[...]Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 98.4 ft. / 30 m Pressure-tight door , pressure-tight up to a water gauge of 98.4 ft. / 30 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 12 in. / 300 mm), rectangular, completely made from 1.4404 (AISI 316 L) stainless steel, statically certified. Door, curved convex design with frame reinforcements to ensure that the acting pressure forces can pass into the door frame via the circumferential frame. With circumferential special silicone[...]
[...]Manhole cover, secure to prevent forced access, weatherproof, round in shape, made of 1.4307 (AISI 304 L). In accordance with DIN 1239:2018-4, security tested to resistance class RC3 (DIN EN 1627). According to requirements of DVGW W 1050 - Object protection for water supply structures. Suitable for use in Ex zone 1. The cover is constructed from a 4 mm thick stainless steel plate with a centrally raised profile. It features stable concealed hinges, stainless steel gas-assisted spring dampers, and an integrated arrestor that can only be released manually. The design includes a handle and a [...]
[...]Manhole cover, secure to prevent forced access, weatherproof, round in shape, made of 1.4307 (AISI 304 L) stainless steel. Design based on DIN 1239:2018-4, security tested to resistance class RC4 (DIN EN 1627). According to requirements of DVGW W 1050 - Object protection for water supply structures. Suitable for use in Ex zone 1. The cover is constructed from a 4 mm thick stainless steel plate with a centrally raised profile. It features stable concealed hinges, stainless steel gas-assisted spring dampers, and an integrated arrestor that can only be released manually. The design includes a handle[...]
[...]The manhole cover is designed to be secure, preventing forced access, and is weatherproof. It is rectangular in shape and made of 1.4307 (AISI 304 L) stainless steel, ensuring durability and corrosion resistance. The manhole cover complies with DIN 1239:2018-4 and is security tested to resistance class RC3 (DIN EN 1627). It meets the requirements of DVGW W 1050 for object protection in water supply structures and is suitable for use in Ex zone 1. The cover is made of a 4 mm thick stainless steel plate with a centrally raised profile, featuring stable concealed hinges, stainless steel gas-assisted[...]