Search

[...]Access door for buildings in potable water supply where chlorine gas is stored or used Chlorine room door, ready for installation, single door, double skinned, completely made from 1.4404 (AISI 316 L) stainless steel, with double rubber seal, the door and frame closing flush, the door opening to the outside (in escape direction), in accordance with UVV and DVGW standards. Door, skin: 1 mm , 55 mm thick, with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, door inside lacquered in RAL 9006 (stainless steel look), with rubber seal. Fastened to the frame[...]

[...]Access door for buildings in the field of potable water supply and wastewater disposal with average security requirements Door, ready for installation, double door, double skinned, completely made from 1.4307 stainless steel (AISI 304 L), with double rubber seal. The door leaves and frame closing flush, the fixable and swing leaf opening to the outside (in escape direction). Door leaves, skin: 1 mm , 55 mm thick, with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, with rubber seal. Fastened to the frame with stable maintenance-free hinge plates. Mortise[...]

[...]Access door for water chambers, ready for installation, single door, double skinned Completely made from 1.4404 stainless steel (AISI 316 L), with double rubber seal. The door and frame closing flush, the door opening to the outside (in escape direction). Door leaf, skin: 1 mm , 55 mm thick, with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, door seal certified to KTW and DVGW W270 standards. Fastened to the frame with stable maintenance-free hinge plates. Mortise dead lock completely made from stainless steel according to DIN 18251, class 3, provided[...]

[...]Access door for buildings in the field of potable water supply and wastewater disposal with average security requirements. Door, ready for installation , single door, double skinned, completely made from 1.4307 (AISI 304 L) stainless steel, with double rubber seal, the door and frame closing flush, the door opening to the outside (in escape direction). Door leaf , skin: 1 mm, 55 mm thick, with injected CFCs-free polyurethane hard foam insulation, longitudinally ground surface finish, with rubber seal. Fastened to the frame with stable maintenance-free hinge plates. Mortise dead lock according[...]

[...]Prefabricated manhole, completely made of 1.4307 (AISI 304 L) stainless steel Watertight, with entrance and installation opening in accordance with DVGW Standard W 122. Completely shielded arc welded, acid-treated in a pickling bath and passivated, including all built-in components. Completely stainless steel - offers long life and hygiene Absolutely water-tight - no danger of leakage Bottom made of tear pattern plate (slip resistance R 11 in accordance with DIN 51130) with inclination to the pump sump For bolted fixing on a customer-provided concrete foundation (required for watertight [...]

[...]Safety access ladder with guard rail, with design certification and CE marking, in accordance with DIN EN 14396, made of 1.4307 (AISI 304 L) stainless steel. Designed to attach an insertable entrance aid. In accordance with UVV regulations ladders with 3 m or 5 m a height of all must be equipped with devices that protect personnel against falls from a height. In accordance with DIN EN 14396, made of 1.4307 (AISI 304 L) stainless steel, designed to attach an insertable entrance aid. Handles made of special profile of high rigidity (57 x 25 x 2.5 mm), covered with PVC caps. Rungs made of U-profile[...]

[...]Safety access ladder, with design certification and CE marking, in accordance with DIN EN 14396. Made of 1.4307 (AISI 304 L) stainless steel. Handles made of special profile of high rigidity (57 x 25 x 2.5 mm), covered with PVC caps. Rungs made of U-profile with perforated surface, 30 mm, slip resistance R 13, step height 280 mm, clear ladder width 300 mm, 400 mm or 500 mm. Completely shielded arc welded, acid-treated in a pickling bath and passivated. Variants Type A) Vertical installation Including long wall fixings, 150 mm brackets adjustable in height for dowelling, providing a minimum tread[...]

[...]Guard grate in accordance with DGUV regulation 103-007, rectangular, made from 1.4307 (AISI 304 L) stainless steel, universally applicable and retrofittable under manhole covers. Guard grate manufactured from angle profile, load-bearing up to 200 kg, with hinges and gas pressure spring for easy opening and closing. Support made of angle profile, for internal bolted fixing under the manhole cover. Guard grate for mounting under the manhole cover and above or next to the climbing system. Both grate and support are shielded arc-welded and acid bath cleaned before washing, drying and surface passivation[...]

[...]Aeration/deaeration plant, max. throughput 720 m³/h Natural aeration/deaeration plant with air connections on both sides to improve the hygiene in drinking water reservoirs. Completely made of 1.4307 (AISI 304 L) stainless steel except the filter material, shielded arc welded, acid-treated in a pickling bath and passivated. Louvre, attack-proof , pre-finished, rigid design, with a stable frame, slats and 1 x 1 mm insect screen. Air line in partial lengths according to the specific local conditions, with a connecting plate designed to suit the louvre for air-tight bolted fixing to the interior[...]

[...]Aeration/deaeration plant, max. throughput 300 m³/h Natural aeration/deaeration plant with air connections on both sides to improve the hygiene in drinking water reservoirs. Completely made of 1.4307 (AISI 304 L) stainless steel except the filter material, shielded arc welded, acid-treated in a pickling bath and passivated. Louvre, attack-proof , pre-finished, rigid design, with a stable frame, slats and 1 x 1 mm insect screen. The insect screen serves as first filter stage and prevents the ingress of small animals, insects and organic coarse material. Air line in partial lengths according to[...]