Search

[...]Single-beam entrance aid, with design certification in accordance with DIN 19572 Made of 1.4404 (AISI 316 L) stainless steel. Available as either a removable and portable or as stationary collapsible unit. Consisting of a handle and guide. Guide with two holes, diameter: 12 mm, for bolted fixing to the wall of the manhole. With a possibility of adjustment for the handle. Handle of distortion-free pipe, 33.7 x 3.6 mm, total length: 1500 mm. Completely shielded arc welded, acid-treated in a pickling bath and passivated. Optionally available in: Stainless steel fixing material: stud anchors Special[...]

[...]Fold-back, extensible entrance aid, with design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 300 mm, 400 mm, 500 mm width. The fold-back, collapsible entrance aid EH KV is folded vertically upwards and extended when in use. As it is extensible, it is easy to operate and very convenient to use for the operating personnel. After use, the EH KV entrance aid is retracted and folded over the manhole opening and can thus remain in the manhole. Access ladders must have a handhold at their exit. This requirement is deemed to be [...]

[...]Fold-back entrance aid, made of 1.4307 (AISI 304 L) stainless steel For safety access ladders with 300 mm, 400 mm, 500 mm width. In accordance with DIN 3620. Note: The 1.1 m projection required according to DIN 19572 is not achieved with this design variant of the entrance aid. Completely shielded arc welded, acid-treated in a pickling bath and passivated. Options: 1.4404 (AISI 316 L) stainless steel[...]

[...]Fall arrestor type S5c with self-unfolding safety belt type HSE-BFD and spring safety hooks Certified and approved by “TÜV SÜD PRODUCT SERVICE GmbH“. CE 0123 in accordance with DIN EN 353-1, suitable for HUBER safety guard rails. Optionally available: Safety belt in accordance with EN 361, form A (breast-shoulder-crotch belt), suitable for safety guard rail.[...]

[...]North America It's the next chapter in the success story of the HUBER Multi-Rake Bar Screen RakeMax ® , which has been on the market for many years. As the name CenterFlow already suggests, the incoming wastewater is channelled through the open end face into the "interior" of the screen and the U-shaped bar rack installed parallel to the flow direction. The incoming wastewater flow is broken up and flows through the one-dimensional bar rack arranged to the right and left of the end plate at right angles to the inflow direction before the treated wastewater is deflected a second time by 90° back [...]

[...]São Paulo, Brasil[...]

[...]Glasgow, Scotland[...]

[...]Sao Paulo, Brazil[...]

[...]HUBER Report Archive News Newsletter Archive HUBER Report Archive Sorry, there are no results available for this category at the moment Back Older editions 2024-06-03 HUBER Report Ausgabe 2024 Continue reading 2024-06-03 HUBER Report Ausgabe 2025 Continue reading 2023-07-25 Regensburg, Germany Energy from Wastewater: Presentation of HUBER ThermWin System with Bavaria's Minister of Finance at the House of Bavarian History Regensburg Bavaria's Minister of Finance and Home Affairs Albert Füracker visited the Museum of Bavarian History in Regensburg... Continue reading 2022-04-06 Berching, Germany[...]

[...]Šumperk , Czech Republic On Thursday, 12 October, the official inauguration of the sludge treatment plant at the Šumperk WWTP in the Czech Republic took place. With this state-of-the-art sludge treatment solution, the operator of the wastewater treatment plant, Vodohospodářská zařízení Šumperk, a. s. (VHZ) and its subsidiary, Šumperská provozní vodohospodářská společnost, a.s. (SPVS), have realised a milestone project and are prepared for all future environmental legislation and challenges in the field of sewage sludge treatment. Completed in only three months In a record time of only three months[...]