Search

[...]Entrance handle, completely made of 1.4307 (AISI 304 L) stainless steel Consisting of bent pipe 33.7 x 2.0 mm with fixing plates for wall fixing. Entrance handle, completely shielded arc welded, acid-treated in a pickling bath and passivated. Optionally available in: 1.4404 (AISI 316 L) stainless steel Stainless steel fixing material: stud anchors[...]

[...]Insertable entrance aid, with design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 300 mm, 400 mm, 500 mm width. Overall length: 1200 mm. Entrance aid in accordance with DIN 19572. Access ladders must have a handhold at their exit. This requirement is deemed to be fulfilled if one or both handles of a ladder project at least 1.1m beyond the exit height. The insertable entrance aid has hooks welded on so that it can be hung onto the top rung and remain inside the manhole. Completely shielded arc welded, acid-treated in a [...]

[...]Collapsible hand post with double handle, with design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 300 mm, 400 mm, 500 mm width, for ladder lengths from 2010 mm. Overall length: 1800 mm. Entrance aid in accordance with DIN 19572. Access ladders must have a handhold at their exit. This requirement is deemed to be fulfilled if one or both handles of a ladder project at least 1.1 m beyond the exit height. Completely shielded arc welded, acid-treated in a pickling bath and passivated. Optionally available in: 1.4404 (AISI 316[...]

[...]Single-beam entrance aid, with design certification in accordance with DIN 19572 Made of 1.4404 (AISI 316 L) stainless steel. Available as either a removable and portable or as stationary collapsible unit. Consisting of a handle and guide. Guide with two holes, diameter: 12 mm, for bolted fixing to the wall of the manhole. With a possibility of adjustment for the handle. Handle of distortion-free pipe, 33.7 x 3.6 mm, total length: 1500 mm. Completely shielded arc welded, acid-treated in a pickling bath and passivated. Optionally available in: Stainless steel fixing material: stud anchors Special[...]

[...]Fold-back, extensible entrance aid, with design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 300 mm, 400 mm, 500 mm width. The fold-back, collapsible entrance aid EH KV is folded vertically upwards and extended when in use. As it is extensible, it is easy to operate and very convenient to use for the operating personnel. After use, the EH KV entrance aid is retracted and folded over the manhole opening and can thus remain in the manhole. Access ladders must have a handhold at their exit. This requirement is deemed to be [...]

[...]Fold-back entrance aid, made of 1.4307 (AISI 304 L) stainless steel For safety access ladders with 300 mm, 400 mm, 500 mm width. In accordance with DIN 3620. Note: The 1.1 m projection required according to DIN 19572 is not achieved with this design variant of the entrance aid. Completely shielded arc welded, acid-treated in a pickling bath and passivated. Options: 1.4404 (AISI 316 L) stainless steel[...]

[...]Fall arrestor type S5c with self-unfolding safety belt type HSE-BFD and spring safety hooks Certified and approved by “TÜV SÜD PRODUCT SERVICE GmbH“. CE 0123 in accordance with DIN EN 353-1, suitable for HUBER safety guard rails. Optionally available: Safety belt in accordance with EN 361, form A (breast-shoulder-crotch belt), suitable for safety guard rail.[...]

[...]Adjustable louvre TT10.B for internal face of the wall, ready for installation, 1.4307 (AISI 304 L) stainless steel. Frame , made from angle section with boreholes for bolted fixing. Slats , adjustable, overlapping when closed, with chain pull lockable in any position. Both frame and slats are shielded arc-welded and acid bath cleaned before washing, drying and surface passivation. Options: 1.4404 (AISI 316 L) stainless steel Fixing material[...]

[...]On Wednesday, 16 October 2024, the Bavarian District Presidents and Directors of the Bavarian State Ministry of the Interior, Sport and Integration visited the HUBER SE headquarters in Berching together with Berching's First Mayor Ludwig Eisenreich. The programme included a presentation of the company and a factory tour. The Bavarian District Presidents met in Berching for their autumn conference on 16 and 17 October. Georg Huber (CEO and shareholder of HUBER SE) welcomed the Bavarian District Presidents and heads of the Bavarian Ministry of the Interior to the company headquarters in Berching/[...]