Search

[...]Very high screenings removal capacity and separation efficiency with low head loss Simple and robust design adapted to project-specific requirements Variable cleaning intervals and speeds Various design options enable use for coarse and fine screening of large dirt loads The powerful Multi-Rake Bar Screen RakeMax® V cleans surface water even with high dirt loads Due to the increasing pollution of surface water, operators of water withdrawal systems are faced with the challenge of effectively removing contaminants through mechanical cleaning. The extent of surface water withdrawal from rivers [...]

[...]Maximum retention of fibres and hair Operating reliability for membrane bioreactors Maximum COD / BOD 5 reduction rates Mechanical pretreatment is required for both municipal and industrial wastewater in order to remove coarse materials and separate floating, settling and suspended solids. Depending on the method of wastewater treatment that is applied the mechanical pretreatment system must fulfil different requirements in terms of separation efficiency. Special plants which operate according to the MBR princi­ple put the highest demands on the mechanical pretreatment system as all coarse material[...]

[...]Create value from waste! Sewage sludge is the „waste product“ that is generated on sewage treatment plants. Dry your sewage sludge to reduce disposal costs and use your „waste“ as a fuel or fertiliser resource! Dry, low-dust, disinfected granular biosolids product Easy and safe to handle Tailor-made heat utilisation concept Reduced disposal costs Design and Function The HUBER Belt Dryer BT makes waste a valuable resource ... … in the most efficient way ... The unique HUBER HELIX air flow system ensures that only the minimum required amount of drying air is blown through the dryer by the [...]

[...]Insertable entrance aid, design certification in accordance with DIN 19572 Made of 1.4307 (AISI 304 L) stainless steel, for safety access ladders with 400 mm or 500 mm width with guard rail and safety climbing devices. Access ladders must have a handhold at their exit. This requirement is deemed to be fulfilled if one or both handles of a ladder project at least 1,1 m beyond the exit height. Completely shielded arc welded, acid-treated in a pickling bath and passivated. Optionally available in: 1.4404 (AISI 3016 L) stainless steel Pivoted design, type EH FSS D, for comfortable attachment of the safety[...]

[...]Sewage sludge drying using a heat pump – an environmentally friendly and cost-effective solution for municipal and industrial wastewater treatment The compact containerised solution The HUBER Cold Air Dryer HPS® has been developed to efficiently, safely and cost-effectively dry sewage sludge, all within a ready-to-operate, modular containerised design. Who is the sludge dryer for? Specifically for small to medium-sized sewage treatment plants (10,000 to 50,000 p.e.) If there is no source of waste heat for drying but surplus electricity is available, for example from a solar PV system, the HUBER[...]

[...]Cable operated coarse screen for reliable removal of bulky material: Protection of pumping station Seawater intake Surface water intake Sewage treatment plants Screen sizes: Screen width: up to 4 m. Wider on request Discharge height above channel floor: up to 30 m. Deeper on request Bar spacings: ≥ 16 mm Installation angle: 70-90° Design and Function The HUBER Grab Screen Trashlift can be easily retrofitted into existing channels, even an installation without channel recesses is possible. Waste water is screend via a coarse bar screen /trash rack with the collected screenings being removed by[...]

[...]HUBER Screw Conveyor in a lidded trough Transport of coarse, fine and compacted screenings, sludge, grit, and solids from industrial processes HUBER Screw Conveyors Ro8 T are installed for horizontal or inclined transport of screenings, dewatered sludge, grit etc. from wastewater treatment plants, or other solids from industrial processes. The entire process of material transport takes place within a lidded trough. Gentle movement in an enclosed pipe prevents odor nuisance and dust development. Design and Function The HUBER Screw Conveyors are custom made for the individual product to be conveyed[...]

[...]HUBER Screw Conveyor in a closed tube Transport of coarse, fine and compacted screenings, sludge, grit, and solids from industrial processes Customized designed for horizontal, inclined and even vertical transport The HUBER Screw Conveyors are installed for horizontal, inclined and even vertical transport of screenings, dewatered sludge, grit etc. from wastewater treatment plants, or other solids from industrial processes. Gentle movement in an enclosed pipe prevents odor nuisance and dust development. Design and Function The HUBER Screw Conveyors are custom made for the individual product to be [...]

[...]Efficient distribution of screenings Temporary storage of screenings Optimal distribution into containers Particularly suitable after a HUBER Wash Press WAP® The HUBER KT tipping trough is the ideal solution for evenly distributing screenings from wash presses. Designed for maximum reliability and flexibility, the HUBER Tipping Trough KT ensures optimised transfer of screenings to downstream containers. Design and Function The HUBER KT tipping trough uses a level sensor to detect incoming screenings and start the distribution process. The automated rotation of the trough allows the screenings[...]

[...]Reduced disposal costs Less than 3 % organic content Very high solids content of > 90 % Easy to retrofit after existing grit classifiers Conventional grit separation Conventional grit classifiers separate virtually all solids contained in the grit trap effluent. This classified and partly dewatered grit is usually more or less contaminated with organic particles. Subsequent grit washing The classified grit is therefore further treated in the subsequent grit washer where the organics are separated from the mineral particles. Design and Function Due to a defined introduction of upwardly directed [...]